How To Search Paksat Channels?

A lot of people on the internet want to know how to scan Paksat channels in a receiver. Many people want to know how to search Paksat channels in the receiver. In this article I will tell you about complete scanning of Paksat channels. From now on, you will not need to ask anyone about the setting of Paksat channels in the receiver.

How To Scan PakSat 38e Channels in Reciever

How to scan Paksat 38e Channels?

Paksat is a Pakistani satellite on which you can watch many Pakistani channels. There are mostly News Channels on Paksat. A lot of people love to watch news so they prefer to install paksat satellite. There are currently 3 sports channels on Paksat Satellite which are very important for cricket enthusiasts. Because the number of people watching cricket in the world is also very high. Also the Dramas channels on paksat 1r 38e are also very good.

Follow these instructions to scan or search Paksat 1r 38e channels in the receiver:-

1. First press the Menu button from your receiver's remote.
2. A lot of options will open up on your screen. Out of these options you have to open the Installation option.
3. Now a new window will open on your LED screen where you have to make some settings.
4. First you have to select your desired Satellite named Paksat 38e which is at 26th position in the given list.
5. Then you have to select the type of LNB which is C Band.
6. Now you have to select Frequency or TP of C Band LNB of Pakat38e which is 5150.
7. If your Dish is already set then you do not need to apply Strong TP or Frequency of Paksat 1r 38e Satellite.
8. But if you want to set your dish on Paksat 38e then you have to install Paksat's strong TP which is 4005 Vertical 15555 which we also write 4005 v 15555.
9. If you have not set your Dish Antenna on Paksat then first set your Dish on Paksat and strengthen the Signal Quality of the channels.
10. If you have used Diseq Switch on Dish Antenna then now select the desired Port Number of Diseq Switch.
11. But if you haven't used Diseq Switch then leave the Diseq Switch port option Off.
12. Now you have to select the Blind Scan or Auto Scan option and then press the Ok button from the remote of your receiver.
13. Some receivers use the Colours buttons from the remote of the receiver to enable the scanning option. These colour options appear on the screen of your LED screen - you have to see the search or scan colour option on your LED screen and then you have to press the same colour button with your receiver remote.
14. Now the scanning or searching of the channels of your desired Paksat satellite will start on your TV or LED screen.
15. When scanning of Paksat channel is complete then you have to select YES option and press Ok button from the remote of receiver to save Paksat channels in your Satellite Receiver.

Congratulations your receiver has been searching for your desired satellite channels.

You can install Paksat Satellite on any place in any country of the world except Pakistan, you just need to know the correct direction. Different receivers may have different options for scanning channels but the method of searching for channels is the same in all of them. All you have to do is follow the procedure. Hopefully you have learned the complete method of scanning Paksat channels in the receiver from this written article of mine.